Don't Believe These "Trends" Concerning Double Glazing Lock Repairs
Double Glazing Lock Repairs
The use of high-quality locks on your doors and windows helps to prevent burglars from gaining access to your home. They don't usually like to break glass or attempt to get through windows that are open.
However, some double-glazing owners have encountered issues with their door lock or window lock after it's been installed. Fortunately, these issues can be fixed without having to pay for new double glazing.
Broken or faulty locks
A locksmith can repair your uPVC window lock or door lock if it is damaged or is not working properly. They can repair hinges, striker plates and locks for your double-glazing. They can also reposition the cylinder to fix any misalignment issues which could cause your handle to not work properly.
If the key fits into the lock but it won't turn or is difficult to insert the mechanism could be seized up. Dirt or grease can get stuck in the mechanism. If this is the case, it may be possible to clean the lock and then lubricate it. It is crucial to apply a dry lubricant such as graphite or teflon, rather than oil, which can attract dirt and adhere to the inside of the mechanism. After lubricating the lock, you should insert the key and attempt to turn it. Double Glazing Window Repairs rickmansworth Repair My Windows And Doors should make through the mechanism and the lock should be able to rotate without difficulty.
A faulty lock can also be caused by loose screws within the mechanism of the lock. They can loosen, fall out, or even break off completely, preventing the lock from being able to work properly. A screwdriver can be used to tighten these screws, but care must be taken not to over-tighten them since this could cause damage to the internal components.
A faulty lock can be dangerous for both you and your family, especially if you have small children. They can open the door without knowing, giving them access to your house. If you're concerned that this could occur, a professional locksmith can help you re-secure the double glazing doors.
Misty Glaze are a professional uPVC and double glazing company based in Lancing and can repair all kinds of damaged and damaged mechanisms handles, handles, cylinders, and lock systems for both uPVC windows and doors. We can also modify the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement doors and/or windows are not always necessary.
Broken or Faulty Handles
A lot of double-glazed windows come with the multi-point lock as part of the overall security package. This is a great option for those who are concerned about potential burglars trying to gain entry to their home. Ask your locksmith about antilift blocks. They can be put in alongside your existing locks and can help keep your windows firmly shut.
It's not uncommon for the handles to be damaged or fail. They are the first component of your window to be forced open by criminals who want to break in. The good news is, this is among the easiest parts to repair.
Modern handles made of aluminium and uPVC operate a multi-point locking system known as Espagnolette which is designed to resist forced entry. This security upgrade is offered as an option for new uPVC windows. Older style uPVC and aluminium handles can be upgraded to lock bolts that shoot also as an optional extra on new double glazed windows.
If a handle is damaged, it's crucial to get it repaired as quickly as you can. Faulty handles may prevent the window from closing properly and permit drafts to get in. It could also be a weak point that opportunistic burglars could exploit, putting your family and belongings at risk of theft.
To repair the broken mechanism, you must first access the window frame and remove the damaged handle. The gearbox can then be accessed to determine the type of gearbox used to open the handle. This allows to replace the handle that matches the profile and the internal window frame mechanisms.
After the mechanism has been replaced the handle can then be re-affixed using the original screws - but we would recommend replacing them with longer ones because this will ensure a more secure fit. The final step is to seal the handle using an opaque sealant. This will shield it from further deterioration. After that the window will be fully operational again, and at only a fraction of the cost of replacing the entire window.
Broken or Faulty Hinges
If your windows do not close properly, you could be experiencing draughts, an affliction of your home's security barrier and an increased risk of water or damp damage. Broken or faulty window hinges are a typical issue that can be fixed easily.
If your windows made of uPVC won't open or close, it is likely that hinges need to be replaced or repaired. While many window companies require that you purchase a new window unit to resolve this simple issue, we're able to replace the faulty hinges and save you money.
Window hinges may break after repeated use, or they might be damaged due to corrosion over time. If you have a broken window hinge, it is important to take precautions to avoid further damage. This includes not forcing the window to open or close.
You can find the right parts for your hinge by identifying its type. Maco, Mila and Roto are all brands of window hinges. It's best to consult an expert in this situation to ensure that you don't make the mistake of purchasing parts that are not compatible with your current hardware and cause further damage.
The hinges that are not working properly can cause major issue for your uPVC window and doors. They can be the main source of noise, and could also allow water to get into your windows.
Check whether the pin barrels on both sides of the hinge are aligned. If it's not then tap the head pin using the hammer to create a shallow bend in the hinge barrel. This will keep the pin in its place. A friend can help you hold the doors while you remove hinge screws and hinges. Replace the hinges with ones that are of the same size, and install the screws with glue. Finally fix the hinges using weights or clamps while the glue dries.
Once your hinges are repaired after which you will be able to put back the door and then reattach the handle. Replace the screws with wooden dowels of the same size as the original screw to ensure they are in line.
Glass that is broken or is damaged
While uPVC windows do an excellent job of keeping cold out and the heat in, they can become damaged over time. This can include broken or damaged glass as well as faulty locks. This is an issue that can be very expensive when neglected. It can also detract from the aesthetics of your home and can lead to loss of insulation, which is why it's crucial to repair any damage as soon as you can.
If your glass has broken but isn't shattered, you can usually fix it yourself using the appropriate tools and methods. First, ensure that the area around the glass is free of debris so that any shards won't harm anyone and aren't an accident-prone area. Next, remove any pieces of broken glass and dispose of them in a safe manner. Then, apply masking tape to the entire area to prevent pieces of glass from scattering and sticking to your skin when you move them. Making sure the glass pane is fitted prior to adhering it to the wall is recommended if you are dealing with windows with two panes. This will ensure that you have enough space to complete your project.
Use a dry, clean cloth to wipe clean the surface of the broken glass and the frame before applying the glue. Follow the application and curing instructions, which may vary from product-to-product. You may have to clamp the glass that has cracked with clamps made of lightweight materials designed to hold delicate materials, depending on the angle.
Once the adhesive is fully set, carefully place the glass into the window frame, making sure it's flush with the edges of the frame and that there aren't any gaps between the glass and the window sash. Be cautious not to flex the window as it's being reinstalled, as this can weaken the seal and lead to water infiltration and condensation.
If you have a glass window that's completely shattered or has larger cracks, contact a professional glazier like O'Brien(r) to arrange a replacement. If you leave broken glass unattended, it could pose a safety risk for children and pets and is why it's important to act quickly.